Hi all,
I have updated the Lomita network config file (lomita_network.xml) for the Time-of-Day (TOD) signal controller. The file was put in the "config" folder. What I have done includes:
1. The simulation horizon was extended to 24 hours;
2. There are three timing plans used in the network, which are scheduled as follows:
00:00 - 06:00: Plan 1
06:00 - 10:00: Plan 2
10:00 - 16:00: Plan 3
16:00 - 20:00: Plan 2
20:00 - 24:00: Plan 1
The timing plan is set based on real signal data. Please let me know if you want to have the details of the timing plan.
3. The demand profile is
00:00 - 03:00: 0 vph
03:00 - 04:00: 100 vph
04:00 - 05:00: 200 vph
05:00 - 06:00: 250 vph
06:00 - 07:00: 500 vph
07:00 - 08:00: 1000 vph
08:00 - 10:00: 500 vph
10:00 - 12:00: 250 vph
12:00 - 15:00: 200 vph
15:00 - 16:00: 500 vph
16:00 - 17:00: 1000 vph
17:00 - 18:00: 500 vph
18:00 - 20:00: 200 vph
20:00 - 21:00: 100 vph
21:00 - 24:00: 0 vph
Please feel free to try and comment.
Subscribe to:
Post Comments (Atom)
1 comment:
I tried running the network myself. I set the sampling period be 5 (sec) and it took around 10 - 15 mins to finish simulation. The simulation result looks good which shows morning and evening peaks. You may try speeding the simulation up by choosing a longer sampling period, say 20 sec.
Post a Comment